Recall Kit (Stator Kokusan Flywheel Mosfet Regulator Gasket) Aprilia RSV4 Tuono V4 1000 1100 11-17
Art.Nr.: RMS900-103810
sofort verfügbar

Lieferzeit: 2 - 3 Werktage

379,51 €

inkl. 19% USt., zzgl. Versand

Recall Kit (Stator Kokusan Flywheel Mosfet Regulator Gasket) Aprilia RSV4 Tuono V4 1000 1100 11-17
Stück
Produktdetails anzeigen

Recall Kit (Stator Kokusan Flywheel Mosfet Regulator Gasket) Aprilia RSV4 Tuono V4 1000 1100 11-17

Recall-Type Stator Flywheel Rotor Gasket & MOSFET Voltage Regulator
Aprilia 2011-2017 RSV4
Aprilia2011-2017 Tuono V4
Repl.# 2D000049 897479 B043488

ACHTUNG - ATTENTION 
This version of the stator and flywheel are in use for RSV4 engine numbers higher than 3413 only.
All Tuono V4s seem to use this Kokusan version.
Double-check the flywheel with your original before buying this kit.

When using our Aprilia MOSFET regulator on Tuono V4 applications, the larger regulator housing is a very tight fit.
It may require slight cutting, grinding, or modification to the plastic mounting area to clear the larger housing and wiring harness.

Recall-Type Stator Flywheel Rotor Gasket & MOSFET Voltage Regulator For Aprilia 2011-2017 RSV4 & 2011-2017 Tuono V4 Repl.# 2D000049 897479 B043488

Introducing our newest heavy-duty recall-type charging system upgrade kit for Aprilia 2011-2017 RSV4 & 2011-2017 Tuono V4.

Anyone who rides or repairs Aprilia’s motorcycles is probably familiar with the flywheel problems common to these models. Most of these bikes will have had at least one flywheel failure in their lifetime so far. Low quality epoxy was used on OEM flywheels to secure the magnets to the rotor body. Over time and many heat cycles, the epoxy fails allowing the magnets to come loose and contact the stator, potentially causing catastrophic damage.

To prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a complete reliable heavy-duty charging system replacement kit for your Aprilia. The kit includes a brand new MOSFET voltage regulator since it is often damaged when stators fails.

Included in this kit

Heavy-duty Kokusan brand recall-type OEM flywheel
Triple-tested heavy-duty stator
Heavy-duty voltage regulator with RMSTATOR’s renowned MOSFET regulation technology
Stator crank case cover gasket

With this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologies.
Features

Built to OEM size

Fits precisely in your ride: install it and forget it.

RMSTATOR renowned MOSFET voltage regulation design
Significantly decreases internal operating temperature with highly efficient MOSFET transistor regulation circuit. This technology runs much cooler than the OEM silicon rectifier regulation circuit and requires much less power to operate.

Improved epoxy

Uses high temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment.

High grade steel capping

Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.

Precise balancing
Eliminates crankshaft vibrations for longer engine longevity.

Shop with confidence

Don't waste time with temporary solutions, and start fixing your ride like a pro!

Please note: This version of the stator and flywheel are in use for RSV4 engine numbers higher than 3413 only.
All Tuono V4s seem to use this Kokusan version.
Double-check the flywheel with your original before buying this kit.

Motorcycle 2017 Aprilia RSV4 RF 1000
Motorcycle 2017 Aprilia RSV4 RR 1000
Motorcycle 2017 Aprilia Tuono V4 1100 Factory
Motorcycle 2017 Aprilia Tuono V4 1100 RR
Motorcycle 2016 Aprilia RSV4 RF 1000
Motorcycle 2016 Aprilia RSV4 RR 1000
Motorcycle 2016 Aprilia Tuono V4 1100 Factory
Motorcycle 2016 Aprilia Tuono V4 1100 RR
Motorcycle 2015 Aprilia RSV4 1000 Factory
Motorcycle 2015 Aprilia RSV4 R 1000
Motorcycle 2015 Aprilia Tuono V4 1000
Motorcycle 2014 Aprilia RSV4 1000 Factory
Motorcycle 2014 Aprilia RSV4 R 1000
Motorcycle 2014 Aprilia Tuono V4 1000
Motorcycle 2013 Aprilia RSV4 1000 Factory
Motorcycle 2013 Aprilia RSV4 R 1000
Motorcycle 2013 Aprilia Tuono V4 1000
Motorcycle 2012 Aprilia RSV4 1000 Factory
Motorcycle 2012 Aprilia RSV4 R 1000
Motorcycle 2012 Aprilia Tuono V4 1000
Motorcycle 2011 Aprilia RSV4 R 1000

 

Technische Daten:
Stator

Dimensions:
Interior diameter : 42 mm
Exterior diameter : 105 mm
Thickness : 15 mm
Length of wires stator to grommet : 100 mm
Length of wires grommet to plug : 330 mm

Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3

Wire to wire resistance :
Alternator : Between Each Yellow = 0.4 ohms +-20%

Flywheel

Dimensions:
Exterior Diameter: 121 mm
Interior Diameter: 107 mm
Interior Diameter Center Housing: 19 mm
Exterior Diameter Center Housing: 34 mm
Thickness (exterior): 35 mm
Thickness (interior): 30 mm

Mosfet Voltage Regulator

Dimensions:
Width: 80 mm
Length: 110 mm
Height: 28 mm
Wires length: 150 & 400 mm
Fixation holes center to center: 80 mm

Other specifications:
Number of plugs: 2
Number of pins: 7
Number of wires: 7
Minimum Charging Voltage: 14.5V +- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: 15V
Operation Temperature: -20° to 85°

Set besteht aus :
RMS120-103587
RMS010-103591
RMS020-103783
RMS 050-103753


How to Install RMSTATOR Aprilia RSV4 Tuono Kokusan Flywheel Stator Recall Upgrade Kit

How to Install RMSTATOR Aprilia RSV4 Tuono Kokusan Flywheel Stator Recall Upgrade Kit

How to Install RMSTATOR Aprilia RSV4 Tuono Kokusan Flywheel Stator Recall Upgrade Kit

Dieser Artikel besteht aus

Dies ist nur eine kleine Auswahl unserer Produkte

Tools

Dies ist nur eine kleine Auswahl unserer Produkte

Kunden kauften dazu folgende Produkte

Dies ist nur eine kleine Auswahl unserer Produkte