RM30313 Polaris RZR 900 1000 XP Regler Mosfet Sportsman 325 570 ACE 13-15 OEM 4014029 4015229
Height : 49 mm
Length: 106 mm
Width : 111 mm
Fixation holes center to center : 82 mm
Wires length : 600 mm & 580 mm
Other specifications :
Number of plugs : 2
Number of pins : 5
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: <15V
Operation Temperature: -20° to 85°
Polaris ACE 570 EFI 2016 2016
Polaris Sportsman 325 ACE 2014 2016
Polaris Sportsman 570 ACE 2015 2016
Polaris RZR 1000 XP 2014 2016
Polaris RZR 1000 XP INTL 2014 2014
Polaris RZR 1000 XP Turbo 2016 2016
Polaris RZR 4 1000 XP 2014 2016
Polaris RZR 4 900 2014 2014
Polaris RZR 4 900 INTL 2014 2014
Polaris RZR 4 900 XP 2012 2013
Polaris RZR 570 EFI 2012 2012
Polaris RZR 900 2014 2014
Polaris RZR 900 ACE 2016 2016
Polaris RZR 900 INTL 2014 2014
Polaris RZR 900 XP 2012 2013
Polaris RZR 900 XP INTL 2012 2012
Don't settle for an unreliable charging system!
2012-2016 RZR 900/1000 models are well known for repeated voltage regulator failures due to manufacturing quality issues and poor placement on the vehicle.
Fix and forget the problem with RMS Lab's advanced technologies!
With increased demand for an alternative solution to subpar OEM parts and unproven manufacturer recalls, we had our RMS Labs? engineers tackle the problem. They came up with a permanent solution to give Polaris RZR owners confidence in their vehicles once and for all.
This Kit Includes:
- OEM regulator housing for direct replacement
- RMSTATOR Renowned MOSFET regulation circuit for low operating temperature.
- Automotive grade stock location wiring harness with OEM-quality connectorsli>
- Plug & Ride Design
You might want to consider our other kits
- RMS020-103793 Heavy Duty Mosfet Voltage Regulator Performance Upgrade STAGE 2 ? Stock Location Kit
- RMS020-103775 Heavy Duty Mosfet Voltage Regulator Performance Upgrade STAGE 3 ? Front Hood Relocation Kit
RMS Labs technologies included
RMSTATOR renowned MOSFET voltage regulation design
Significantly decreases internal operating temperature with highly efficient MOSFET transistor regulation circuit.
This technology runs much cooler than the OEM silicon rectifier regulation circuit and requires much less power to operate.
Automotive grade wiring harness with OEM-quality heavy-duty connectors
Made with the same Delphi connectors as OEM Polaris parts, our wiring harnesses are manufactured in a factory with controlled quality processes. They use the same Cross-Link braided copper wire as the OEM parts, and resist heat, oil, acid, gas and more with very low electrical resistance.
Plug & Ride design
Our voltage regulator housings are manufactured to OEM specifications for a fast and easy installation.
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery.
Always fully charge your battery before performing any charging system tests or replacing parts.
If there is any doubt, have the battery load tested or replaced.
There are two possible regulators for the RZR 900 XP and RZR 4 900 XP 2012 models.
This regulator fits models built 3/16/12 and after.
For the version built 3/15/12 and before, the right regulator is part RM30351.
Always check in the 'Fits models' section and please compare to your original part before buying.