Flywheel Improved for Polaris 400 L Big Boss Scrambler Sport Sportsman Xplorer Xpress 300 400 L 94-03 FF95 1964K01

Flywheel Improved for Polaris 400 L Big Boss Scrambler Sport Sportsman Xplorer Xpress 300 400 L 94-03 FF95 1964K01

Artikelnummer: RMS120-102377

Kategorie: Polaris Scrambler 400

Sofort verfügbar
Lieferzeit: 9 - 10 Werktage (Ausland)

254,95 €

inkl. 19% USt. , zzgl.

Flywheel Improved for Polaris 400 L Big Boss Scrambler Sport Sportsman Xplorer Xpress 300 400 L 94-03 FF95 1964K01

Stück

Improved Flywheel for Polaris 400 L Big Boss Scrambler Sport Sportsman Xplorer Xpress 300 400 L 94-03 FF95 1964K01

Bitte prüfen , der Rotor ersetzt FF95 & 1964K01

OEM Nummer:
3084760
3084784

Before attempting to start your Polaris vehicle adjusting the air gap is necessary.
Rotate the flywheel so the raised node is lined up with the pick up/pulser
coil and adjust as close as possible but no less than 0.010".

Dimensions:
Exterior Diameter: 178 mm
Interior Diameter: 106 mm
Interior Diameter Center Housing: 24.50 mm
Exterior Diameter Center Housing: 22.50 mm
Thickness (exterior): 44.70 mm
Thickness (interior): 40 mm

2003 Polaris Trail Blazer 400
2002 Polaris Xplorer 400
2002 Polaris Scrambler 400 4x4
2002 Polaris Scrambler 400 2x4
2001 Polaris Xplorer 400
2001 Polaris Scrambler 400 2x4
2000 Polaris Xplorer 400
2000 Polaris Scrambler 400 4x4
2000 Polaris Scrambler 400 2x4
1999 Polaris Xplorer 400
1999 Polaris Sport 400
1999 Polaris Scrambler 400 4x4
1998 Polaris Xplorer 400 L
1998 Polaris Xplorer 400
1998 Polaris Sport 400
1998 Polaris Scrambler 400 4x4
1997 Polaris Xpress 400 L
1997 Polaris Xpress 300
1997 Polaris Xplorer 400 L
1997 Polaris Sportsman 400
1997 Polaris Sport 400
1997 Polaris Scrambler 400 4x4
1997 Polaris Big Boss 400 L
1996 Polaris Xpress 400 L
1996 Polaris Xpress 300
1996 Polaris Xplorer 400 L
1996 Polaris Sportsman 400
1996 Polaris Sport 400
1996 Polaris Scrambler 400 4x4
1996 Polaris Big Boss 400 L
1996 Polaris 400 L
1995 Polaris Xplorer 400
1995 Polaris Sportsman 400
1995 Polaris Sport 400
1995 Polaris Scrambler 400 4x4
1995 Polaris Big Boss 400 L
1995 Polaris 400 L
1994 Polaris Swedish 400L 4x4
1994 Polaris Sportsman 400
1994 Polaris Sport 400
1994 Polaris Norwegian 400L 4x4
1994 Polaris 400 L

Introducing our newest heavy duty flywheel rotor for Polaris 300, 400 & 500cc ATVs.

Anyone who rides or repairs a Polaris 300, 400 & 500cc ATV's is probably familiar with the flywheel problems common to these models. Most of these bikes will have at least one flywheel failure in their lifetime so far. Low quality epoxy was used on OEM flywheels to secure the magnets to the rotor body.
Over time and many heat cycles, the epoxy fails allowing the magnets to come loose and contact the stator, potentially causing catastrophic damage.

For years, service shops & dealerships have offered low cost repairs for Polaris flywheels to save the 400$+ OEM replacement. This sounds like a great idea at first, but there are some serious issues!

The common repair is using JB Weld© Marine Blue Epoxy to reattach the loose original magnets, or to install new ones.
Epoxy fixes do repair flywheels in short term, if they are done correctly.
However, this kind of repair can easily cause immediate problems, and impact long term reliability of your ATV.