Clutch Kit Can-Am 650 Outlander, Outlander Max, XMR 4x4 (all years)

Clutch Kit Can-Am 650 Outlander, Outlander Max, XMR 4x4 (all years)

Artikelnummer: DBO650

Kategorie: CAN AM

Artikel vergriffen
Lieferzeit: 6 - 7 Werktage (Ausland)

249,00 €

inkl. 19% USt. , zzgl.

Clutch Kit Can-Am 650 Outlander, Outlander Max, XMR 4x4 (all years)

Stück

Beschreibung

Can-Am 650 Outlander, Outlander Max, XMR 4x4 (all years) Can-Am 650 Outlander Can-Am 650 Outlander Max Can-Am 650 XMR 4x4

This clutch recalibration for the CAN-AM 650 Outlander offers flexible tuning options for stock or oversized tires and high elevations.

Improved acceleration, throttle response and backshifting with no loss of top speed when set up properly for your application.

This kit uses a different adjustable base weight than the 800 cc and other kits. This clutch kit has adjustable flyweigfht lever arms and a new primary spring.

Instructions show you how to set up the flyweights for different tires and applications. Notes: The Green/Yellow primary spring supplied is the most popular, however, other options are available, see below.

If using 29.5 Zol and larger use addition of Yellow /Black secondary spring DPSS-Y/B and follow the section in the instructions that says ?

When using the optional secondary spring for 29.5 and larger tires?.

The yellow /black optional secondary spring is also used with extreme type mud competition tires like Outlaws, etc. if used primarily for mud. XMR 650 The optional secondary spring is not normally needed with the stock 28?

Mudzillas on this model if used for trail applications. Using the optional secondary spring when not needed can hurt speed and fuel economy.

This DBO 650 kit used by the Warnert Racing Factory Can-Am team in their successful 2007 WPSA Series.